Conductivity Electrodes
Cole-Parmer Oakton Flat-Surface Conductivity Probe, K = 1.0, 1 m Cable
If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Hach Company Probe Cable Depth Markers for Rugged IntelliCAL Probes
Taking readings at specific depths with rugged outdoor electrodes is a snap with these depth markers. Visually identify the depth of your electrode by attaching depth marker securely on cable at points to meet your needs. Five markers per package.Note: For use with rugged outdoor electrodes only.
Hach Company Contacting Conductivity Sensor, Mid-Range Conductivity, K=1.0, 3/4" Kynar Compression Fitting
Nominal Cell Constant (K) = 1.0, 3/4 inch NPT Kynar (PVDF) Compression Fitting, 6m (20ft) Analog Cable, Titanium Electrode
Hach Company Radiometer Analytical CDC511T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1)
The Radiometer CDC511T is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and TPX body. The CDC511T sensor's 4 platinum ring design ensures results in general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The CDC511T can be used with a flow-through cell for pure water measurements and meets requirements of USP 24-NF19. It has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters.
Hach Company Sension+ 5062 portable titanium conductivity cell for “difficult” applications
Sension+ 5062 is a two-pole titanium conductivity cell with a titanium body and built-in temperature sensor. The 5062 has a fixed 1 meter cable and MP5 connector dedicated for use with Hach Sension+ Portable Conductivity meters. The 5062 is ideal for conductivity measurements in extreme conditions and for “difficult” applications, including dirty and viscous samples.
Andwin Scientific M-CELL 6/PK
The M-Cell or Six Pack is composed of six test kits. Each test kit has vacuum packed expendables that are used to conduct one test. This product also contains a container of distilled water to perform water separation tests.
Cole-Parmer Conductivity/Temp probe, K=0.1 for 6 and 6 series meters
Oakton Conductivity/Temp Probe, for 6 and 6+ Series Meters; K=0.1, If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
METTLER TOLEDO PROCESS ANALYTICAL INC COND SENSOR 1.5TRI 0.1C SS ISM
NC2051302 COND SENSOR 1.5TRI 0.1C SS ISM
METTLER TOLEDO PROCESS ANALYTICAL INC SENSOR CONDUCTIVITY 316L SS
NC2075463 SENSOR CONDUCTIVITY 316L SS
Hach Company Intellical™ CDC401 Field 4-Poles Graphite Conductivity Cell, 10 m Cable
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. This Rugged CDC401 version is built with a stainless steel body ensuring sufficient weight to the probe for an easy outside handling, the sensing part is protected by a shroud, and the connection is ensured by strong and visible yellow coloured cable onto which you can clip depth markers (optional accessories), making the CDC401 rugged models specially designed for field use. CDC401 Rugged is available with a 5, 10, 15, or 30 meters cable. The CDC401 Rugged is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in all types of external environment such as river, surface and ground waters, ponds, lakes, sea, wastewater plant, source water, drinking water reservoir for water quality, environmental and treatment process purposes.